◎ 名前:LaunchersHP管理者
◎ ホーム:http://www.yp1.yippee.ne.jp/launchers/
◎ 作成日:2000.12.29(金) 15:42, 210.232.183.198
|
INTRODUCTION
INTRODUCTION
Welcome to the fascinating and fun sport of outdoor handlaunch glider flying! Expert or novice, you have chosen a model with an outstanding contest record and a kit of the very finest materials available. It is left then only for you to utilize your best building ski11s while carefully following the plans and instructions in the assemby of your Max Flyer to ensure its success.
In some instances I have specified a partic- ular type produet (i.e. , lacquer) or product brand (SIG DT. fuse). This is because I have found the specified product or brand to be the only one suited for the indicated usage. Substitution may result in reduced performince or malfunction.
Ray HarPer
LIST OF MATERIALS TO COMPLETE KIT
( ) 5 Minute epoxy such as Devcon or. Sig.-Hot Stuff or other cyanoacrylate glue suitable for Wood. White glue can also be used. ( ) Contact cement such as Weldwood or 3M Spray. ( ) Lacquer Sanding sealer such as Sherman Williams or clear lacquer and talc mixture-DO NOT USE DOPE ( ) Sig DT fuse ( ) 2-Straight pins ( ) #8 Rubber band (2 included in parts bag) ( ) Scotch Magic Transparent tape
TOOLS REQUIRED
( ) #11 Xacto knife or single edge razor blade ( ) Sanding blocks with #100-#150 paper, #220-#320 and #400-#600 wet or dry (black) sandpaper
NOTE: Construction sequence and plan is for right handed launching. If you are left bended, substitute the Word right each place left is noted.
|
|