◎ 名前:メール投稿
◎ 作成日:2004.5.26(水) 19:05, 128.121.114.181
|
(F1A)M&K製の水平尾翼ピン、サイズ(直径)変更
[投稿者]高橋 浪男 [投稿日時]2004May26 19:00
<ご注意>M&K製の水平尾翼ピンの直径が今年2月より変更になってるようです。Eモデルでの現状・前部直径1.5mm.、センター部1.0mmのワイ ヤーですが、新タイプはそれぞれが直径1.25mmづつのパイプに変更。軽量化の為と思われますが、新水平尾翼はそのままでは従来の機体フィットしない と思われます。 As I already wrote now we use (from Feb 2004) the same stabs with old stabmount and tail mechanism. Main reason we can't find the tubes 1.5 mm and don't want use steel wire because of more weight. We'll return to 1.5 if we'll find it. We check exactness and reliability of that decision at several contests (USA, Norway, Sweden, Aus, NZ, Orel). Tube 1.25 mm diameter without problems goes to slot of stabmount with diameter 1.5+mm. Because of rubber the stab tube rest always to the same point of the stabmount slot. There are no problem at the time of speeding up. At the back probably you'll need to to make more size of the slot of the nut if you use old nuts.
|
|